The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.
Durable & Lightweight
The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions. Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.
Innovative, Adjustable, & Easy to Use
Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.
Smooth & Unobtrusive
From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Made in U.S.A.
Gun Laws & Restrictions
Ammunition, Magazines and other items are restricted in various jurisdictions throughout the United States. Please know the laws in your local jurisdiction. Dark Storm Industries will work with you to accommodate any legal purchase in these areas. Below are a few examples. Please contact us with any questions.
New York City - Ammunition order up to 200 rounds only. The buyer must provide a copy of their NYC Rifle / Pistol Permit before the order can ship. The easiest way to do this is simply photograph it with your Smart Phone and email it to firstname.lastname@example.org with your order number.
New York State - Ammunition may be ordered online BUT only for in-store pickup. Effective 30 days from when the NYSP puts their background check system online, you will need to provide any required information (TBD) and pass the background check to complete the transaction. If you are purchasing ammunition for a pistol you will need to show your NYS pistol permit.
Connecticut - For ammunition orders, the buyer must email a copy of their Connecticut pistol permit, eligibility certificate, long gun eligibility certificate or an ammunition certificate along with a valid form of identification in order to purchase ammunition. The easiest way to do this is simply photograph it with your Smart Phone and email it to email@example.com with your order number.
Stun Guns and Tasers
New York State - no sales to residents of New York City. All other counties are ok for retail or shipment.
Rifles & Magazines
Law Enforcement - If you are attempting to purchase a firearm or magazine in a jurisdiction where they are restricted to Law Enforcement Only, you will need to provide a copy of your law enforcement ID card before we can ship and if stated below, a letter authorizing the purchase for duty use on agency letterhead.
Below is a compilation of publicly available information to assist you in your purchases. The information contained herein should not be considered legal advise or any guarantee of legality. Customers should contact local law enforcement for clarification.
Returns and Defective Product
Your satisfaction is important to Dark Storm Industries. If you need to return a product, we will make every reasonable effort to satisfy you.
- Proof of purchase is required for all returns. This is your printed register receipt for in store purchases or order # for online sales linked to your account.
- Returns or exchanges must be processed within 30 days of purchase. All returns or exchanges must be in new, unused, sale-able condition unless it is defective.
- There are no returns or exchanges on firearms, ammunition, body armor, stun guns, tasers, pepper spray, discontinued, or clearance items.
- Training may be rescheduled without any additional fees, but it non-cancellable / non-refundable
- A 20% restocking fee will apply to all order cancellations or changes. This includes delayed NICS transactions that are requested to be cancelled.
- A $50.00 fee will be assessed on all NICS Deny Refunds.
- Items with prices ending in "XX.77" are discontinued and/or clearance items
- If you transfer in a firearm that is not compliant or you are unable to possess, the firearm will be shipped back at your expense. By attempting to transfer non-compliant guns, you will also forfeit your transfer fee.
- If you order a firearm that is NOT legal in your location, a 20% restocking fee will be assessed upon the order being refunded.
- Gift Cards must be treated as cash as they cannot be replaced if lost or stolen. Gift Cards cannot be redeemed for cash. Gift cards do not expire or charge fees.
- Lead times on firearms are estimations and are subject to change. Due to ongoing supply chain issues which were caused by the global pandemic, we cannot guarantee any specific timeframe. We do our absolute best to accurately estimate said lead times.
Please contact our customer service department via email at firstname.lastname@example.org or phone at 800-963-7700 to obtain an RMA # prior to shipping your item back to us.